It was super easy to make. Decide the size you want, it should be big enough to be able to slam your portafilter on the bar without hitting the back side. Measure, cut, glue/nail together. I decided to make the back piece a little taller for aesthetics, it also provides a some splash protection. I wanted it to look distressed, so I hit it with a chain and hammer before putting it together, along with sanding the edges of the wood to rough it up a bit. Put your own personal touch into it. For the bar, I wrapped it with a decent amount of duct tape, then some black electrical tape to make it look good. Make sure you use a really solid piece of wood for this part, as you will be hitting it pretty hard. Stain it to your liking and you are ready to go!!
Enjoy your clean countertop!